Get Estimate

 

 

How do you actually feel with regards to What Would Cause My Electric Water Heater to Stop Working??

Numerous modern-day houses make use of an electrical water heater for their heating system, because of its ease as well as ease of use. Nonetheless, just like any other electric home appliances, troubles may emerge with its use, unexpectedly. It can be truly irritating to get up to a cold shower rather than a warm one or having your bath with water that isn't warm sufficient or perhaps also hot. Whatever the instance may be, hot water heater issues can be fairly nerve-racking. The good news is, we've made a checklist of possible services to your hot water heater issues. There are a number of variables that could create a lot of these issues, maybe a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for security. Whatever the trouble is, getting it repaired need to not pose excessive of a concern if you follow these actions:

 

Examine Your Power Supply:

As basic as this might appear, it is extremely needed. Without adequate power, your hot water heater will certainly not function. So the first thing to do when your water all of a sudden retires is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the breaker tripped. If the breaker is the concern, simply turn it on and off once more. Change any damaged or damaged fuse. Examine the device with power after these changes to see if it's now functioning.

 

Inspect the Burner in the Water Heater:

If it's not a power problem, then attempt checking out your heating element if it is still working. Evaluate each of your heating elements to make sure the trouble isn't with any one of them. If any one of them is faulty, replace that part and after that inspect whether the warm water is back on.

 

Examine Your Thermostat:

If your water heater still isn't working or the water coming out isn't hot sufficient, you might require to examine the temperature level settings on your upper thermostat. Guarantee the circuit breaker is switched off before doing anything. Open the gain access to panel and also press the red switch for temperature level reset over the thermostat. This should help heat the water. Turn the circuit breaker back on as well as inspect if the issue has been fixed.

 

Call An Expert:

If after replacing all faulty parts and resetting your temperature, the water heater still isn't working, you may need to get in touch with an expert plumber for a specialist point of view. The trouble with your heating unit could be that the hot and cold taps have been switched or it may be undersized for the amount of warm water required in your house. Whatever the situation might be, an expert plumber would help solve the problem.

 

Conclusion

Hot water heater troubles are not constantly major. A number of them are because of minor issues like a blown fuse or damaged burner. Changing the defective parts should do the trick. Nonetheless, if you are still incapable to fix the issue, give a call to your nearest plumber to come to get it dealt with.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

We hope you enjoyed our piece on No Hot Water — Water Heater Repair. Thanks a lot for finding the time to read through our content. Do you know another individual who is sincerely interested in the subject? Be sure share it. Thanks for your time. Visit us again soon.

Start Now